Vent Sensor 6’’ 150mm Extractor Fan

Vents 150 MATP
Parameter     Value     Measurement unit
∅D     150     mm
B     212     mm
H     195     mm
L1     66     mm
L2     60     mm
Maximum capacity - 295 m3/h.

APPLICATIONS      
Continuous or periodic exhaust ventilation of bathroom, showers, kitchens and other utility spaces.
For mounting in windows.

DESIGN      
Modern design and aesthetic look.
The casing and the impeller are made of high-quality durable ABS plastic, UV resistant.
The intellectual impeller design makes the fan efficiency high and the service life long.
The fan and motor are specially designed for silent operation.
Fan is equipped with a thermal actuator that provides smooth opening and shutting of automatic louver shutters for air back flow preventing.
Protection rating IP 24.

MOTOR      
Reliable and low-watt electric motor.
Designed for continuous operation and requires no maintenance.
Equipped with overheating protection.

CONTROL      

Manual:
The fan is controlled by a room light switch. It is not included in the delivery package.
The fan is controlled by the built-in pull cord switch V.
Speed control is possible through a thyristor speed controller (see Electrical Accessories). Several fans may connected to the same controller. Speed controllers can not be connected to the fans with T, TH, TP, VT, VTH modification.

Automatic:
By the electronic control unit BU-1-60 (see Electrical Accessories). The control unit is supplied separately.
By the timer T (the built-in run-out timer enables the fan operation within 2 to 30 minutes after the fan switching off).

MOUNTING FEATURES      
The fan is mounted directly into the window opening.
For 12 V low-voltage motor fan connection to 220 V / 50 Hz power mains use the step-down transformer TRF 220/12-25 that is available upon separate order.